Ian Update 28: Chainsaw safety
Posted On: September 30, 2022
Homeowners may be anxious to get outside and begin cleaning up fallen trees and broken tree limbs. If you’re using a chainsaw, keep a few safety practices in mind. Remember, a chainsaw operating at full throttle moves at 50 mph!
Do
- Read the owner's manual before operating a chainsaw.
- Keep the cutting area clear of spectators and pets.
- Work with a partner if possible.
- Wear protective clothing – a hard hat, goggles, sturdy shoes, gloves and trim-fitting clothes.
- Note any overhead hazards, including hanging tree limbs and utility lines.
- Be careful with fuel. Fuel the saw at least 10 feet from ignition sources.
- Stay on the ground. Don't cut from a ladder.
- Stand to the side when cutting.
- Cut at full throttle; bring the saw up to speed before starting cuts.
- Keep both hands on the saw handles.
- Let the saw come to a complete stop before reaching for the chain or blade.
- Cut wood only. Don't allow dirt and rocks to touch the chain.
- Be careful with small branches. Unweighted limbs may spring back when cut.
- Adjust the depth gauge setting every time you sharpen the chain.
- Maintain proper chain saw tension. A loose chain can come off the guide bar and strike you.
- Shut off or engage the chain brake whenever the saw is carried more than 50 feet, or across hazardous terrain.
Don’t
- Touch a hot muffler.
- Cut above chest height.
- Use the bar for leverage; it's there to guide and support the cutting chain.
- Bury the tip in the wood.
- Push or force the saw. Let the saw do the work. If you find that you have to push, stop and sharpen the chain.
- Refuel a hot saw.
- Drop-start the saw.
- Operate a saw when using alcohol or drugs or when you're fatigued.
Additional information:
Volusia County Citizens Hotline: 866-345-0345
www.volusia.org/emergency
